Weedless Tube Jigs ?

  • brad_gravenhof
    Rochester MN
    Posts: 289
    #1232158

    Does anyone out there have any good way to make a tube
    jig weedless?
    Thanks in advance !!!!

    coot
    North Central Wisconsin
    Posts: 459
    #267783

    I rig my tubes Texas style, like the weedles worm rigs. I like to use Lindy’s new tube rattle/weight when I rig them this way.

    steveo
    W Central Sconnie
    Posts: 4102
    #267784

    you can bury the hook tip in the tube itself. Those weedless super doo heads make great tube jigs. Check the outlet store here.

    Dave Koonce
    Moderator
    Prairie du Chien Wi.
    Posts: 6946
    #267785

    These here !!! They make great weedless jig heads for any plastics..

    brad_gravenhof
    Rochester MN
    Posts: 289
    #267787

    Thanks guys!
    Do you just take something and pull
    the guards thru the the hole youmake for the eye or what?
    Thanks again!

    blue-fleck
    Dresbach, MN
    Posts: 7872
    #267788

    Just run the tube up the shaft of the hook until it bumps the back of the head. The head should be in front of the tube. Although you can rig it so the head is inside of the tube but that takes a little practice.

    blue-fleck
    Dresbach, MN
    Posts: 7872
    #267789

    It should look something like this.

    brad_gravenhof
    Rochester MN
    Posts: 289
    #267790

    Thanks blue fleck, Iwas wantint to bury the
    head of the jig for alittle more eratic action.
    But I’ll give it a try next time!

    bassbaron
    eldridge, ia
    Posts: 709
    #267792

    the way to bury the head is by starting 1/4″ or so from the end and push the hook pt into the tube then weave the tube onto the hook and stuff the head in- then the weedguard can stick out, the head is inside and you will have to make a second hole with the line tie. I am somewhat computer illiterate or i would draw you a picture.

    Practice with old or torn tubes if you want, or rig them texposed and pinch the hook pt back into the plastic.

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.