keel guard

  • schommdog
    Posts: 15
    #1239249

    Looking to replace the keel guard on my ranger boat. Has anyone dealt with this issue? If so, did you do it yourself or have someone else do it?

    Eric Rehberg
    Eau Claire, WI
    Posts: 3071
    #1151998

    Mike, What brand keel gaurd do you have on there currently? Is it a stick on one or the actual “Keel Gaurd” one that is epoxied? If its epoxied it might be a little tougher to get cleaned up and a new one on but can be done. The stick on one just takes some time to clean up but is much easier.

    I would STRONGLY suggest the actual Keel Gaurd that is epoxied on once you get to that point. If you have any questions let me know and will help ya out the best I can.

    schommdog
    Posts: 15
    #1152319

    Thanks Eric for the reply. It is a Hambys guard, which is epoxied on. I have did a little checking around and it will cost about 1000.00 give or take a couple hundred to have the old one removed, preped for a new one, and the new one installed. I would consider not doing anything, but I am missing part of the old one, and there are areas now that are perfect for invasive species to catch on and hide!

    Eric Rehberg
    Eau Claire, WI
    Posts: 3071
    #1153253

    Being the epoxied one it isnt going to be easy nor cheap.

    If there is anything I can help ya out with let me know!!

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.