Trolling Rods for Long Lining Cranks

  • SKEREEP
    Red Wing, MN
    Posts: 82
    #1232642

    I’m looking to upgrade the trolling rods I use for long lining on Pepin. I will be running Diawa Sealine L17s with 10 pound mono on these rods. I won’t be running boards on these, as I’ve already got a set up for that. I’m willing to spend up to $100 each. Any opinions out there on some great rods in this price range?

    Thanks in advance,
    Scott

    kooty
    Keymaster
    1 hour 15 mins to the Pond
    Posts: 18101
    #299241

    Scott,

    Try doing a search on trolling rods here. There has been a tone of discussion in the past. I’m a St. Croix Pro Glass fan. I like the 7ft mediums for long lining. You will here a lot of guys who like the wild river 8’6″ also. Not sure on the price of those though. Check out http://www.stcroixrods.com Look under their catalog.

    DeeZee
    Champlin, Mn
    Posts: 2128
    #299246

    Scott,

    I would second the St. Croix Wild river 8’6″ rods. These rods have a nice gentle bend on them that is dynamite for letting the fish inhale the crank before hook sets are made pre-maturally with the common braids we have out today.
    I have been pulling cranks shallow in the river as of recently with these rods and have been amazed at the versatility and responsiveness of this new blank!

    Here is a product review James Holst and I did on the 10’6″ WR model.

    The 8’6″ Wild River model is a spitting image of the 10’6″ model with a bit more of a faster tip! Perfect longliner!
    Good Luck in your decision.

    stillakid2
    Roberts, WI
    Posts: 4603
    #299247

    Quote:


    Scott,

    Try doing a search on trolling rods here. There has been a tone of discussion in the past. I’m a St. Croix Pro Glass fan. I like the 7ft mediums for long lining. You will here a lot of guys who like the wild river 8’6″ also. Not sure on the price of those though. Check out http://www.stcroixrods.com Look under their catalog.



    The WR series is over $100 but not by much. You’re a fan of the Pro Glass? I just picked one up over the winter…….. a 10 footer! I can’t wait to get out there and give it a try! Question: Is a longer rod better for boards or long lining?

    SKEREEP
    Red Wing, MN
    Posts: 82
    #299270

    Thanks for the reply guys. I did read James’ report. Are the prices for St. Croix rods pretty similar from store to store, or is there a particular place I should go.

    Can’t wait to use them. Thanks again.

    Scott

    DaveB
    Inver Grove Heights MN
    Posts: 4473
    #299126

    Last year or the year before I went to 7′ St Croix Premier Med/Light spinning rods w/ 14lb Fireline. My hooking percentage went up and the lost fish went down.

    I had been using stiffer rods, but w/ the no stretch line, the hooks would pull out. If you are running a no-stretch line, make sure to have plenty of give in the rod.

    derek_johnston
    On the water- Minnesota
    Posts: 5022
    #299288

    I would recommend the St.Croix PGT80MM 8′ Glass rod for long lining. $100 retail

    kevinneve
    Devils Lake ND area
    Posts: 330
    #299321

    That’s what I was looking at…the PGT80MM and pairing them with the 17 Diawas. I

    I’ve been wanting to get a lighter set up that be held easier. The 27’s are heavy and are best kept in a rod holder.

    I’ll keep my Diawa 27’s for lead core and boards.

    derek_johnston
    On the water- Minnesota
    Posts: 5022
    #299162

    Kevin. Try putting balancers on your rods. They work great.

    bill_cadwell
    Rochester, Minnesota
    Posts: 12607
    #299203

    I have heard ALOT of good things about the 8’6” Wild River St. Croix rods so I bought two over the winter. Haven’t had a chance to use them yet but they sound like good rods. Another option would be to call Mike at Hooked On Fishing 507- 282-4982 and ask how much he would charge to make you two of these in a custom rod with the St. Croix blanks.
    Thanks, Bill

    kooty
    Keymaster
    1 hour 15 mins to the Pond
    Posts: 18101
    #299356

    Kid,

    I use my two 8’6″ med/hev for board rods, teamed with sealine 27’s. On my 7′ mediums I use the sealine 17’s. The last couple years trolling cranks has really gotten to be a favorite of mine. It will never surpass that thump when a walleye in-hales a jig, but it’s still a blast. Especially down on Pepin when things really get going. Ripping along a 3+mph and wham. That’s why I really like the glass rods, lots of give when those fish in-hale the number 5 jointed. OK, now I’m all worked up for the trolling bite.

    bill_cadwell
    Rochester, Minnesota
    Posts: 12607
    #299333

    Trolling the riprap at 3mph for walleyes and all of a sudden a smallie hits your crankbait and comes jumping out of the water into the air is alot of fun to see. Those longer rods can get you closer to the rocks and closer to the excitement too.
    Thanks, Bill

    stillakid2
    Roberts, WI
    Posts: 4603
    #299393

    Quote:


    Kid,

    I use my two 8’6″ med/hev for board rods, teamed with sealine 27’s. On my 7′ mediums I use the sealine 17’s. The last couple years trolling cranks has really gotten to be a favorite of mine. It will never surpass that thump when a walleye in-hales a jig, but it’s still a blast. Especially down on Pepin when things really get going. Ripping along a 3+mph and wham. That’s why I really like the glass rods, lots of give when those fish in-hale the number 5 jointed. OK, now I’m all worked up for the trolling bite.


    Thanks for the info! What line are you using on your differing setups? I just bought my first precision trolling guide and am thinking about using the 10lb. mono with braided leaders.

    kooty
    Keymaster
    1 hour 15 mins to the Pond
    Posts: 18101
    #299394

    I run straight 14/6 fireline on my trolling reels. Lots of backing, then 125 yards of fireline.

Viewing 14 posts - 1 through 14 (of 14 total)

You must be logged in to reply to this topic.