Liqua-Lube / Turbo Lube Hub Kits

  • Steve Plantz
    SE MN
    Posts: 12240
    March 24, 2004 at 9:00 pm #1232621

    Anyone have one of these products? How do you like them? Did you install them yourself or have it done by a dealer? Any other comments good or bad?

    Liqua-Lube

    Turbo Lube Hub Kits

    James Holst
    Keymaster
    SE Minnesota
    Posts: 18926
    March 24, 2004 at 10:46 pm #298123

    I had a set of liqui-lube hubs on a trailer a few years back and loved them. ZERO hassles, no leaks, and it was always nice to be able to walk past and see the level of lube in the hub w/o needing to disassemble or pop off a dust cap.

    riveratt
    Central Wisconsin US-of-A
    Posts: 1464
    March 24, 2004 at 10:49 pm #298124

    I’ve never used them but have seen them. I can’t see why they wouldn’t work well.

    The same basic design is used in many applications, including the front hub/bearing assemblies on 4×4 Polaris ATV’s.

    That design has proven very reliable in the harsh environment the ATV’s get into and, I have to believe a boat trailer would be a walk in the park comparitavly speaking.

    My new boat trailer will indeed use these style hubs.

    Kerry Harvey
    Brownsdale, MN.
    Posts: 286
    March 25, 2004 at 1:01 am #298129

    Steve, I had them on my old trailer, will be getting some for my current trailer. My buddy put mine on, it took him about 2 hours.

    Steve Plantz
    SE MN
    Posts: 12240
    March 25, 2004 at 1:23 am #298137

    Quote:

    Steve, I had them on my old trailer, will be getting some for my current trailer. My buddy put mine on, it took him about 2 hours.

    Kerry,
    If I remember right they are around $100 bucks, is there a kit that comes with it to install and if so is the kit extra? Would your buddy be interested in installing a set for me? I am willing to pay him.

    Kerry Harvey
    Brownsdale, MN.
    Posts: 286
    March 25, 2004 at 3:54 am #298181

    Steve, The kit was a little over 100 bucks. Everything you need comes with. I will talk to Dale tomorrow and see if he will do it.

    herb
    6ft under
    Posts: 3242
    March 25, 2004 at 6:47 am #298198

    Have had mine for a couple years now and they are great. When you order the kit make sure you have the exact measurements of the spindles for the seals. My shorelander has a step down spindle and the kit they sent the first time was for a straight spindle. Installation was a piece of cake.

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.