DIY Tent Pole

  • Bobby Kuennen
    Posts: 44
    January 20, 2017 at 12:42 pm #1667203

    I just picked up a used clam scout. Im 6’4″ and my head is touching the fabric that hangs down on the roof. I think if i had a support pole it will hold it up off my head. I figured i could pick up a piece of conduit but what are my options for clips to attach to the other poles? Clam has them but theyre kind of spendy.

    bigcrappie
    Blaine
    Posts: 4376
    January 20, 2017 at 1:05 pm #1667207

    Clam sells replacement clips and extra poles I am sure you can make something out of those parts.

    Bobby Kuennen
    Posts: 44
    January 20, 2017 at 4:53 pm #1667257
    bigcrappie wrote:

    Clam sells replacement clips and extra poles I am sure you can make something out of those parts.

    Thanks but I was just curious if anyone had a diy ideas because the clips alone are $12 on clams website.

    nhamm
    Inactive
    Robbinsdale
    Posts: 7348
    January 20, 2017 at 4:57 pm #1667258

    Playboy?

    tbruno
    Posts: 53
    January 20, 2017 at 5:47 pm #1667266

    I used some 3/4″ C-Clips from Otter UPC# 609142029001 that I got from Fleet Farm a couple years ago. I don’t know if they are available any longer. I believe they were about $6.00 for four clips. Worked perfectly with 1/2″ conduit to make a support pole for my Clam Scout.

    Ryan P
    Farmington
    Posts: 223
    January 21, 2017 at 8:07 am #1667322

    Amazon and Ebay are good places for clips and stuff like that. Cheap and effective!

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.