Digger Auger Carrier Broken

  • munchy
    NULL
    Posts: 5126
    January 19, 2019 at 3:36 pm #1827588

    Call up digger. Can’t imagine they wouldn’t be willing to work with you.

    Digger Anchor
    7444 County Road 27 NW
    Pennock, MN 56279
    Email: [email protected]
    tel: 320.599.5161

    kbmwer
    Rosemount, MN
    Posts: 45
    January 19, 2019 at 4:12 pm #1827597

    Thanks for the info Munchy! I left a voicemail so I will hopefully hear from them during the week.

    jbg1219
    NW Iowa
    Posts: 680
    January 19, 2019 at 5:23 pm #1827610

    Same thing happened to me… I mounted mine on my snowmobile and put the auger on… when I came back the next day part of the plastic had fallen off.

    archerj
    NULL
    Posts: 51
    January 19, 2019 at 7:42 pm #1827626

    drill a hole in the aluminum tube and insert a small screw to secure the plastic

    kbmwer
    Rosemount, MN
    Posts: 45
    January 20, 2019 at 8:08 am #1827713

    Here is a photo of the plastic part. I am sure that Digger will be able to get me the part but time will tell.

    Attachments:

    1. IMG_0746.jpg

    gimp
    Posts: 210
    January 20, 2019 at 9:00 am #1827720

    I have a K- Drill and it has a larger size shaft and did not fit in the carrier so I made some out of wood and put screwed them down. works great.

    kbmwer
    Rosemount, MN
    Posts: 45
    January 21, 2019 at 4:44 pm #1828229

    Talked to Jeff at Digger Anchor and he said they would send one out no charge. Great customer service! Definitely will support these folks in the future )

    Bigwalleye30
    MN
    Posts: 238
    January 22, 2019 at 2:33 pm #1828485

    Good to hear. I broke the clap a while back due to user error and he sent me a new one free of charge.

    CaptainMusky
    Posts: 25214
    January 22, 2019 at 2:58 pm #1828493

    That is a surprising way to break that piece. What brand auger are you using?

    I was disappointed to find out after installing mine over the weekend that I could no longer use the quick coupler on my auger because it was too big around to fit in that plastic piece.

    kbmwer
    Rosemount, MN
    Posts: 45
    January 22, 2019 at 4:21 pm #1828544

    I have an Ion auger. The shaft fits in well but I do not have the quick coupler.

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.