BFT to Offer 1/16 oz. Precision Head

  • emover
    Malcom, IA
    Posts: 1939
    February 14, 2006 at 5:34 pm #1434431

    that is Good News!

    dave

    shayla
    Posts: 1399
    February 14, 2006 at 6:30 pm #1434433

    Awesome!!! I can’t wait!!!

    Hey Rocky, don’t you owe me a “few” jigs?

    bgrotte
    Rogers, MN
    Posts: 330
    February 14, 2006 at 8:29 pm #1434435

    That sounds good to me!!

    Slip-

    bfishntackle
    Coralville,IA
    Posts: 360
    February 14, 2006 at 11:13 pm #197660

    We’ve never had a 1/16th Oz. Precision Head in our line-up and our customers have been after us to add that size time and time again.

    So we listened. For all you jig draggers and shallow-water ringworm pitchers, we’re going to make our first quantities of 1/16th Oz. Precision Heads available to the public at the Madison Sport Show… and at a VERY low price.

    Once we get back from the sports show in Madison look for the 1/16th Oz heads to be on our website with heavier heads in the 1/2 & 5/8 Oz. sizes to be added at the same time.

    If anyone has any questions just holler at me here or send an email to: [email protected]

    emover
    Malcom, IA
    Posts: 1939
    February 14, 2006 at 11:34 pm #15071

    that is Good News!

    dave

    emover
    Malcom, IA
    Posts: 1939
    February 14, 2006 at 11:34 pm #420646

    that is Good News!

    dave

    shayla
    Posts: 1399
    February 15, 2006 at 12:30 am #15073

    Awesome!!! I can’t wait!!!

    Hey Rocky, don’t you owe me a “few” jigs?

    shayla
    Posts: 1399
    February 15, 2006 at 12:30 am #420655

    Awesome!!! I can’t wait!!!

    Hey Rocky, don’t you owe me a “few” jigs?

    bgrotte
    Rogers, MN
    Posts: 330
    February 15, 2006 at 2:29 am #15077

    That sounds good to me!!

    Slip-

    bgrotte
    Rogers, MN
    Posts: 330
    February 15, 2006 at 2:29 am #420689

    That sounds good to me!!

    Slip-

    john23
    St. Paul, MN
    Posts: 2582
    February 15, 2006 at 8:24 am #1434437

    Yessssssss! Finally! Glad to hear it.

    Here’s an obvious question from those of us who won’t be traveling to Madison: how can we get some ASAP?

    John

    bfishntackle
    Coralville,IA
    Posts: 360
    February 15, 2006 at 8:33 am #1434438

    They won’t be released until the sports show unless production goes faster than expected. But by the monday after the show they’ll be available online. That is the soonest I can guarantee release to the general public.

    If sales at the show go the way they did last year I’ll be pouring jigs in the motel room just to make sure I can start shipping online orders on Monday 27, February.

    I’ll post a reminder here when they’re ready to go.

    john23
    St. Paul, MN
    Posts: 2582
    February 15, 2006 at 2:24 pm #15090

    Yessssssss! Finally! Glad to hear it.

    Here’s an obvious question from those of us who won’t be traveling to Madison: how can we get some ASAP?

    John

    john23
    St. Paul, MN
    Posts: 2582
    February 15, 2006 at 2:24 pm #420749

    Yessssssss! Finally! Glad to hear it.

    Here’s an obvious question from those of us who won’t be traveling to Madison: how can we get some ASAP?

    John

    bfishntackle
    Coralville,IA
    Posts: 360
    February 15, 2006 at 2:33 pm #15091

    They won’t be released until the sports show unless production goes faster than expected. But by the monday after the show they’ll be available online. That is the soonest I can guarantee release to the general public.

    If sales at the show go the way they did last year I’ll be pouring jigs in the motel room just to make sure I can start shipping online orders on Monday 27, February.

    I’ll post a reminder here when they’re ready to go.

    bfishntackle
    Coralville,IA
    Posts: 360
    February 15, 2006 at 2:33 pm #420753

    They won’t be released until the sports show unless production goes faster than expected. But by the monday after the show they’ll be available online. That is the soonest I can guarantee release to the general public.

    If sales at the show go the way they did last year I’ll be pouring jigs in the motel room just to make sure I can start shipping online orders on Monday 27, February.

    I’ll post a reminder here when they’re ready to go.

    john23
    St. Paul, MN
    Posts: 2582
    February 15, 2006 at 3:06 pm #1434443

    Quote:

    I’ll be pouring jigs in the motel room just to make sure I can start shipping online orders on Monday 27, February.

    For as long as we’ve waited you’d better be! I look forward to being able to order them! Thanks, Dave!

    bfishntackle
    Coralville,IA
    Posts: 360
    February 15, 2006 at 3:39 pm #1434444

    We’ve got the needed “whatever it takes” attitude here in Prairie du Chien. We’ll have those jigs ready to go on the 27th.

    For those that launch out of Everts Resort on Pool 4, they just placed a “pre-order” for 1/16th oz. Precision Heads so we’ll have them out and available to them for sale on the 27th. A little earlier if the elves in the shop are open to some overtime.

    john23
    St. Paul, MN
    Posts: 2582
    February 15, 2006 at 9:06 pm #15117

    Quote:

    I’ll be pouring jigs in the motel room just to make sure I can start shipping online orders on Monday 27, February.

    For as long as we’ve waited you’d better be! I look forward to being able to order them! Thanks, Dave!

    john23
    St. Paul, MN
    Posts: 2582
    February 15, 2006 at 9:06 pm #420943

    Quote:

    I’ll be pouring jigs in the motel room just to make sure I can start shipping online orders on Monday 27, February.

    For as long as we’ve waited you’d better be! I look forward to being able to order them! Thanks, Dave!

    bfishntackle
    Coralville,IA
    Posts: 360
    February 15, 2006 at 9:39 pm #15120

    We’ve got the needed “whatever it takes” attitude here in Prairie du Chien. We’ll have those jigs ready to go on the 27th.

    For those that launch out of Everts Resort on Pool 4, they just placed a “pre-order” for 1/16th oz. Precision Heads so we’ll have them out and available to them for sale on the 27th. A little earlier if the elves in the shop are open to some overtime.

    bfishntackle
    Coralville,IA
    Posts: 360
    February 15, 2006 at 9:39 pm #420958

    We’ve got the needed “whatever it takes” attitude here in Prairie du Chien. We’ll have those jigs ready to go on the 27th.

    For those that launch out of Everts Resort on Pool 4, they just placed a “pre-order” for 1/16th oz. Precision Heads so we’ll have them out and available to them for sale on the 27th. A little earlier if the elves in the shop are open to some overtime.

    bfishntackle
    Coralville,IA
    Posts: 360
    February 21, 2006 at 8:03 pm #1434457

    Ha! I fibbed. The 1/16th ounce Precision Heads will be on the website (unpainted only for about a week) and ready for sale on the 23rd – Thursday instead of on the 27th as promised. I just received the first test pours and they’re flawless. These are going to be great for skinny water casting AND dragging livebait when snags are a huge issue. That “plastics” keeper works great on crawlers too ya’ know.

    And to keep Herb happy, out 1/2 & 5/8 ounce jigs will be the next new sizes to go into production. We should have those inside the next two weeks. Just in time for the spring walleye run.

    bfishntackle
    Coralville,IA
    Posts: 360
    February 22, 2006 at 2:03 am #15315

    Ha! I fibbed. The 1/16th ounce Precision Heads will be on the website (unpainted only for about a week) and ready for sale on the 23rd – Thursday instead of on the 27th as promised. I just received the first test pours and they’re flawless. These are going to be great for skinny water casting AND dragging livebait when snags are a huge issue. That “plastics” keeper works great on crawlers too ya’ know.

    And to keep Herb happy, out 1/2 & 5/8 ounce jigs will be the next new sizes to go into production. We should have those inside the next two weeks. Just in time for the spring walleye run.

    bfishntackle
    Coralville,IA
    Posts: 360
    February 22, 2006 at 2:03 am #422989

    Ha! I fibbed. The 1/16th ounce Precision Heads will be on the website (unpainted only for about a week) and ready for sale on the 23rd – Thursday instead of on the 27th as promised. I just received the first test pours and they’re flawless. These are going to be great for skinny water casting AND dragging livebait when snags are a huge issue. That “plastics” keeper works great on crawlers too ya’ know.

    And to keep Herb happy, out 1/2 & 5/8 ounce jigs will be the next new sizes to go into production. We should have those inside the next two weeks. Just in time for the spring walleye run.

    herb
    6ft under
    Posts: 3242
    February 22, 2006 at 6:48 am #1434459

    Herb was talking about the 1/2 and 5/8oz hair jigs.
    Herb and those 20lb sheepheads will be Happy.

    James Holst
    Keymaster
    SE Minnesota
    Posts: 18926
    February 22, 2006 at 9:12 am #1434460

    Can’t make 5/8th ouce hair jigs without 5/8 ounce jigs… lol

    How’s the winter been treating you Herb? I haven’t heard much about you trapping or ice fishing. I heard a rumo that you went and got yourself un-retired. Is that true?

    herb
    6ft under
    Posts: 3242
    February 22, 2006 at 12:48 pm #15325

    Herb was talking about the 1/2 and 5/8oz hair jigs.
    Herb and those 20lb sheepheads will be Happy.

    herb
    6ft under
    Posts: 3242
    February 22, 2006 at 12:48 pm #423090

    Herb was talking about the 1/2 and 5/8oz hair jigs.
    Herb and those 20lb sheepheads will be Happy.

Viewing 30 posts - 1 through 30 (of 35 total)
1 2

You must be logged in to reply to this topic.