Hey guys so my boat is 90 percent done but I need help on this next project.I have a 16 ft lund pike.And the front of it is 38 right at the driver side and in the front its 16 inches now I’m wondering where I can get aluminum square tubing precut and how I should attach it.The picture is of the floor
image66.jpg
Discount steel will cut to exact length. Without seeing how the previous floor was attached I cant say for sure?
Sorry it’s im adding a casting deck not replacing the floor the picture is bad
You can cut aluminum with just about any saw and a carbide blade. We use a miter box to cut aluminum rail all the time just make sure you let your saw gets all the way up to full speed. I love Discount steel but they charge a fortune for special cuts. Riveting works well or self tappers. Make sure you use a marine grade plywood for the deck.
Go to any pawn shop and buy a $20 circular saw.
That’s cut the thousand dollars of aluminum i’ve put in my refurbs.
I Stock about every size Square Alum Tube and Plate that there is. And A lot closer to you than the Cities. Winona Welding 507-454-6944
tim_c how about aluminum diamond plate?
You must be logged in to reply to this topic.
