Auger Mount on Front

Hello,

Looking to get some recommendations on how you all think I could mount my digger auger carrier on the front of the sled. Ideally would like something removable so I can get my cover on the sled going down the road and at home.

Thanks!

Attachments:

1. 

   Sled.jpg
   

Utilizing the bumper is your only choice, perhaps go to a metal fabricating company and see if they can easily mock up an extension piece for the front bumper, then you can use large plastic knob turn bolts to secure it down when in use, take it off when you put your cover on?

Here’s a shot I found of a Bearcat front mount, looks like they just welded some square stock to the existing bumper to attach it to…

Attachments:

1. 

   auger-carrier-003.jpg
   

You can use the supplied digger mounting system, just might need longer bolts. The digger is removable with 5 bolts, a 2 minute job if you bring a cordless drill. Pictures are of the exact same front bumper you have.

Attachments:

1. 

   IMG_2496.jpg
   

2. 

   20180120_145604.jpg
   

3. 

   IMG_2495.jpg
   

Here’s mine. Had to add a few extras with my bumper. Yours should be just bolt and go

Attachments:

1. 

   KIMG0607-scaled.jpg