Mods….I think this should be a sticky in the archery forum.
Today I read yet another thread about someone’s arrow exploding at the shot and carbon driving right through the shooter’s bow hand. Save your hand, save your hunting season and save the doctors bills………CHECK YOUR ARROWS!!!
Here are a couple resources to explain exactly how to do it.
Quote:
Originally Posted by Easton Archery
WARNING – Follow These Instructions To Avoid Personal InjuryAn arrow shaft can become damaged from impacts with hard objects or other arrows or after being shot into a game animal. A damaged arrow could break upon release and injure you or a bystander. You must carefully inspect each arrow shaft, nock, and other components before each shot to see that they have not been damaged. Before shooting, place the arrow between your thumb and fingers, and, using your other hand to slowly rotate the shaft, run your fingertips along the entire arrow length, feeling and looking closely for nicks, cracks, splits, dents, or other marks that could indicate the shaft has been damaged. When checking carbon arrows, perform the following additional tests:
1.Grasp the shaft just above the point and below the nock, then flex the arrow in an arc (bending it away from you and others) with a deflection of 1 to 2 inches (2.5 to 5 cm), and listen for cracking noises. Perform this test four to six times, rotating the arrow slightly between each flex until you have gone around the entire arrow. If you hear or feel cracking, the carbon has been damaged.
2.While still holding the point and fletching ends, twist the shaft in both directions. If the arrow “relaxes” or twists easily, the carbon has been damaged.
If an arrow has been damaged, or if you believe it has been damaged, do not shoot it again as it could break on release, and sharp arrow pieces could hit and injure you or someone
