Anybody use a Sternsaver on a Skeeter MX/WX?

  • JoeMX1825
    MN
    Posts: 19236
    March 11, 2015 at 3:24 pm #1522261

    I hate the idea of drilling holes into the fiberglass. Has anybody used a Sternsaver

    I’m thinking of using one for a Humminbird SI transducer install on my MX1825.

    John Schultz
    Inactive
    Portage, WI
    Posts: 3309
    March 11, 2015 at 3:37 pm #1522265

    If it works, they should sell lots of them.

    JR Carter
    Posts: 43
    March 15, 2015 at 9:50 am #1523507

    I just had a buddy put one on his boat looks good

    Troy Balkowitsch
    Posts: 1
    April 4, 2015 at 9:05 am #1530688

    Here is a picture of my Lowrance structure scan transducer mounted to a SternMate. I used the SternMate because it did not require you to scuff the gel coat to install the base plate. I installed this on a 2014 WX1900. There are many options for movement and getting your transducer right where you need it. I have also noticed that like the SternMate website says it will eliminate the rooster tail from your transducer it has done that. They are a bit spendy but I also did not want to drill any more hole in my new boat and this seems to work pretty well.

    Attachments:

    1. IMG_3049.jpg

    Tonka
    Minnesota
    Posts: 191
    April 4, 2015 at 10:28 am #1530724

    I bought a sternsaver for my boat last year and so far so good. I feel comfortable with it there and it seems more than secure. Hope this helps.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.