2019 Skeeter WX2060

Hi,

I picked up a new to me 2019 WX2060, and I have a random question. I have to keep my boat away from home, so I don’t have too much time to tinker with it, which is where my question comes from.

What is the Bow fill and Bow recirc button for? My boat has a front baitwell, and a rear live well so I get why there are fill and recirc buttons for each, but why for the bow? Last time I had the boat on the water I hit the bow fill button and I heard a pump, but I couldn’t figure out what was going on.

Also, is there a way to pump out the livewell? Mine seems to drain really slow, and again, I haven’t had much time to tinker.

Thanks!

Not exactly sure what youre asking. Bow fill is going to fill your front baitwell. The bow recirc is another pump that recirculates the water in your front baitwell. The drain for both livewell and baitwell is just a valve that opens and gravity drain each respective compartment.

Thanks for the response. I’ll try and clarify

I have 1 livewell in the stern, and one baitwell in the bow and 6 buttons

Bow fill
bow recirc
baitwell fill
baitwell recirc
livewell fill
livewell recirc

I’m not sure why I don’t have only 4 buttons to control the combo of the livewell and baitwell

Make sense?

Ahhhhh! I’ve got a wx1910 and have just the 4 buttons that make sense. Gonna have to let someone else chime in on the 6 button configuration. That seems odd?!

They used the same panel for the 2190 that had a extra baitwell. So misleading on your 2060 and 1 set of switches are dead or not needed.

Dean is correct……

And boy does that urine me off. Because at the last tournament I had a monster brain fart….and I mean a MONSTER brain fart.

I was convinced my bow pump was shot or I had a bad wire. I tore everything apart. Then it finally clicked…..SON OF A!!!!!! I hooked everything back up and realized I was hitting the baitwell buttons (which are not in use and are for a 2190 on my 2060) instead of the Bow buttons.

Needless to say I put stickers over the ones not in use lol….

If you put in a washdown pump maybe you could use the open panel buttons for that.