2012 wx1850 prop and hydrofoil reccomendations

  • andys
    kasson
    Posts: 120
    #1809160

    Just picked up a 2012 wx1850 f150 and a t9.9 has a saltwater 15.25×19 stainless it totally sucks 5500 rpm at 46mph will hardly plane out with 2 people,also have the painted stainless 13.75×19 6000 rpm at 49mph gets on plane ok but bow rises alot and porposes unless trimmed all the way down or wide open and trimmed up.what prop and hydro foil are you guys running on this boat thanks

    Eric Rehberg
    Eau Claire, WI
    Posts: 3071
    #1809977

    Our best overall seems to be a 19p reliance series prop with a cobra marine edge plate.
    If you also have a kicker and normally carry a “heavier” load the 18p may be the best fit for you.

    Buffalo Bill
    Posts: 19
    #1918260

    I know this is old but if you are still not happy try a Rev 4 17p or a Michigan wheel apollo 4 blade 18p with a se400 hydrofoil. These combos make this boat a rocketship and it loves lots of trim. Will handle big water, tubers, and hit 47 on a perfect day.

    reddog
    Posts: 803
    #1918318

    I know this is old but if you are still not happy try a Rev 4 17p or a Michigan wheel apollo 4 blade 18p with a se400 hydrofoil. These combos make this boat a rocketship and it loves lots of trim. Will handle big water, tubers, and hit 47 on a perfect day.

    Do you need the hydrofoil on both props, or just the Apollo?

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.